
Quality & Process Control · Module 3 of 3
How Much to Inspect: Why "Check a Few to Be Safe" Is the Wrong Answer
Two suppliers of pump-caps — A at 0.4% defective, B at 2.5%; a check costs $0.30, a defective that ships costs $30; your VP wants to spot-check 10% to be safe. It sounds like the right amount of caution and it's the most expensive policy on the board. This is Deming's kp rule: the cost of inspecting a fraction is a straight line, so the cheapest policy is always an endpoint — inspect none below the break-even (k1/k2 = 1%), all above it, never a sample. Drag the inspection gate, watch the cost flip none↔all at the break-even, and close the course: the clean rule only runs on a stream that's in control — which is what the first two modules built.
0 of 14 items completed0%~67 min remaining
Material · 14 items